1973-1979 Ford F100 and Bronco Godzilla Swap Engine and Trans Mount Kit 4x4

Designed and produced by RC3 Technologies for the 1978-1979 Ford Bronco and 1973-1979 1/2 ton pickup truck. This kit is manufactured to place a 7.3L Godzilla engine in a stock 4x4 1978-1979 Ford Bronco and 1973-1979 1/2 ton truck. The kit is designed for use with a 6R80 (or similar) transmission and a NP205/Atlas transfer case. It consists of engine mounts, engine towers, a crossmember, a transfer case adapter mount, and all the hardware necessary to mount the powertrain in your truck. The engine towers will come unfinished, but the rip edges can be welded for an additional cost. All components will come in raw steel. No modification is necessary to install this kit, it retains all factory mounting locations. Instructions are included.

An oil cooler relocation or delete may be needed depending on the suspension application.

Photos depict the kit powder-coated black with the rip edges fully welded.

$1029 for the fully welded version, and $969.99 for the non welded version. 

Instructions for Installation Here- https://static1.squarespace.com/static/65044eb04355510ffe0760be/t/6635111dd4c267316a98fdb2/1714753821280/Godzilla+Swap+Kit+Install+Guide.pdf