Designed and produced by RC3 Technologies for the 1978-1979 Ford Bronco and 1973-1979 1/2 ton pickup truck. This kit is manufactured to place a 5.0L Coyote engine in a stock 4x4 1978-1979 Ford Bronco and 1973-1979 1/2 ton truck. The kit is designed for use with a 6R80 (or similar) transmission and a NP205/Atlas transfer case. It consists of engine mounts, a crossmember, a transfer case adapter mount, and all the hardware necessary to mount the powertrain in your truck. The engine towers will come fully welded in raw steel. No modification is necessary to install this kit, it retains all factory mounting locations. Instructions are included.
Note: Requires the use of the F150 Oil Filter housing from 2011-2020. If alternator stays in factory location then it is required to use the F150 Timing Cover and Alternator. Kit shown with KRC power steering system installed and Sanden SD7 AC Compressor and Bracket with F150 Timing Cover.
INSTRUCTIONS FOUND HERE - https://static1.squarespace.com/static/65044eb04355510ffe0760be/t/663510f78a35c15ca3a3490b/1714753783915/Coyote+Swap+Kit+Install+Guide.pdf
Please email or message us if you have any questions regarding fitment.
